Specifications

Printer Tips

Included in the Accessories are Cartridge Capping Assemblies

to enclose the nozzles of the print cartridges. Proper use of the

Cartridge Capping Assemblies help in

maintaining the quality of print from the print

cartridges and help to prevent the ink from drying

and creating severe clogging of the print cartridge

nozzles.

Prolonging

the life of

Cartridges

Use the Cartridge Capping Assemblies when the

30K Printer is left to idle or shut down for a more

than a few minutes. To use the Cartridge Capping Assemblies

the ink cartridges have to be removed from the Print Head

Assemblies. Note: Keep the ink cartridges in order or

numbered otherwise the counter for the percent ink remaining

will give false information.

Employ the following steps to use the Cartridge Capping

Assemblies.

1. Remove the ink cartridge from the Print Head

Assembly. (See section 3-3 for information on

removing the ink cartridges.)

2. Remove any excess ink on the nozzles.

3. Install the ink cartridge nozzle first into the Cartridge

Capping Assembly. Note: Clean any ink buildup on

the rubber seal to prevent it from obstructing the

nozzles.

4. Press the top section completely into the Cartridge

Capping Assembly.

5. Remove the ink cartridge from the Cartridge Capping

Assembly in reverse order. Suggestion: Check the

Print Head Alignment and perform a Purge of the ink

cartridges before operating the printer.

Revision C 30K USERS MANUAL Section 4 -

P/N 90-00203-001