Specifications

Printer Tips
The two 3 Print Head Assemblies need to be synchronized
using the Adjust Print menu when the Test Pattern looks like
one of the two examples below.
Synchronizing
3 Print Head
Assemblies
Head 3 Bank A Head 3 Bank A
Head 2 Bank A Head 2 Bank A
Head 5 Bank B
Head 4 Bank B
Head 6 Bank B
Head 5 Bank B
Head 4 Bank B
Head 6 Bank B
Head 1 Bank A Head 1 Bank A
The Adjust Print menu has to be used when synchronizing the
two banks together. For more information about the Adjust
Print menu see the section in the Service Menu.
• Press the [+] plus or
[ - ] minus buttons to scroll
through the Service Menu options until the 1. ADJUST
PRINT option is displayed on the LCD panel.
• Press the [Enter] button to select this option.
• Press the [+] plus or
[ - ] minus buttons to scroll
through the Adjust Print menu options until the BANK
A TO BANK B option is displayed on the LCD panel.
• Press the [Enter] button to select this option.
• Now print out a Test Pattern by pressing the [Test
Env] button. The printer will print a Test Pattern like
the preceding example.
The Test Pattern consists of three rows of different patterns,
the first wide line and the eighteen vertical lines are used for
synchronizing Bank A and Bank B.
When the two patterns do not match to form long vertical
lines, then perform the following steps.
• Press the [+] plus
(MORE) button to increment the
Move Bank B value on the LCD display.
Revision C 30K USERS MANUAL Section 4 -
P/N 90-00203-001
10