Specifications

Setting up the Printer

The printer is designed to print on a variety of media with

various finishes and coatings. The sharpness of the print

quality will vary with different media types. Depending on

how absorbent the media is, as well as, other qualities, the best

results can be achieved using white wove bonded stock. The

printing quality will be less sharp on tyvek, recycled and

glossy media.

Media

Types

The types of media the printer is able to use is:

• Envelopes: should be stacked to feed with the left

or right edge first.

• Booklets: should be stacked to feed with the sealed

edge leading or stacked with the sealed edge placed

to feed first.

• Catalogs: should be stacked to feed with the sealed

edge leading or stacked with the sealed edge placed

to feed first.

• Postcards: must be 3.5” (88.9 mm) x 5” (127 mm)

or larger.

• Self-Mailers: may be folded in half or “C” or “Z”.

The media must be tabbed.

• Paper: may consist of 16 to 80lb of uncoated to

coated stock. The maximum width and height is

specified in Appendix G.

All folded material and catalogs must be tabbed as per postal

regulations.

The paper types that can be used are:

• White wove

• Bond Paper

• Recycled Paper

• Coated Paper

• Card Stock

• Brown Kraft

• Manila

Revision C 30K USERS MANUAL Section 3 -

P/N 90-00203-001