Specifications

Setting up the Printer

The following environmental considerations must be kept in

mind when selecting a location for the Address Printer. Doing

otherwise may affect the operation and performance of the

Address Printer.

Choosing a

Good

Location for

the Printer

1. Place the printer close enough to the computer for the

parallel cable to reach.

2. Place the printer on a flat, stable surface.

Note: AB switches are

not recommended for

operation with this

printer.

3. Use a grounded, dedicated outlet for the printer only.

Note: Do not use an adapter plug.

4. Avoid locations near direct sunlight, excessive heat,

high humidity, moisture, or dust.

5. Keep the entire system away from large motors or

other appliances that might disturb the power supply or

create potential interference.

Removing

Protective

Materials

The printer is protected during shipping with corrugated

cardboard around the Head Print Carriages.

1. Remove the Top Cover to gain access to the inside of

the printer.

2. Remove the styro-foam protective insert.

Revision C 30K USERS MANUAL Section 3 -

P/N 90-00203-001