Specifications

Appendix G Technical Specifications
Super Draft 600 x 150 Dots per inch
Draft 600 x 200 Dots per inch
Letter 600 x 300 Dots per inch
Executive 600 x 600 Dots per inch
Printing Speeds in #10 envelopes per hour
Print
Quality Min
Throughput /
Hr
8” Media
Throughput / Hr
Super Draft 24,000 30,000
Draft:- 19,000 22,000
Letter:- 13,000 15,000
Executive:- 6,500 7,500
Fonts
12 Internal Fonts that are scalable Unlimited TrueType Fonts (downloadable)
Point Size
Smallest Largest
4 point 30 point
The Interface Panel
The interface panel is located on the side of the machine. It contains the main power switch, the power
receptacle and fuse. The interface ports (parallel and USB) are the interface connections between the
30K and your computer.
1. Connect the line cord from the printer receptacle to a properly grounded outlet box. Do not use
an adapter plug. Avoid using outlets that are controlled by wall switches and shared with other
equipment.
2. Connect the interface cable from the computer to the appropriate connector on the printer
interface panel. The typical cable length is six (6) feet long (182. 9 cm) for parallel and fifteen
(15) feet (457.2 cm) long for serial.
Revision C 30K USERS MANUAL Appendix G -
P/N 90-00203-001
2