Thermostat User Manual

and thei r fact ory default setti ngs. Not all numbers are used in the Legacy Seri es because

not all options are availabl e in thi s series -- and numberi ng is consi st e nt across the T1,

T2, and T6 thermos t at lines.

Configuration Options -- Summary:

Option 01 -- Equipment type

Option 03* -- Fahrenheit/Centigrade

Option 04 -- Fan (G) on with W output

Option 07 -- Zoning

Option 10 -- Reversing valve

Option 11 -- Minimum deadband between heating and cooling setpoints

Option 12 -- Smart Recovery (programmable models only)

Option 13 -- Room air temperature offset adjustment

Option 15 -- Auto Changeover availability

Option 16 -- Maximum cycles per hour

Option 17 -- Time between equipment stages

Option 18* -- Continuous backlighting

Option 21* -- Keypad lockout

Option 24* -- Progr am mable/ non--programmabl e (programm abl e models only)

Option 2 5* -- Number of programmable periods per day

Option 26 -- Minimum cooling setpoint

Option 27 -- Maximum heating setpoint

Option 99 -- Reset to factory d efaults

Those options marked with an asterisk are also adjustable by the homeowner. See

Owner’s Manual for further information.