Overview of Primary Product

3
PRODUCT DATA INFORMATION
Compatible Communicating Products
Compatible with most Evolutionr System indoor and outdoor
equipment built since 2004; see equipment specifications for
details
NOT compatible with:
Evolutionr Small Package Products
Evolutionr System Access Modules (SAM)
NOTE: The ability to remotely access and adjust the settings of
the Evolution Connex Control with the MyEvolution web and
mobile applications is dependent on the compatibility of the user’s
computer/network or mobile device, the Evolution Connex
Control, and/or the MyEvolution web server with, and the
availability of, the user’s internet service provider or mobile device
carrier service. Bryant Heating & Cooling Systems makes no
representations or warranties, express or implied, including, to the
extent permitted by applicable law, any implied warranty of
merchantability or fitness for a particular purpose or use, about the
compatibility of the user’s computer/network, or mobile device,
with the Evolution Connex Control, and/or the MyEvolution web
server, with, and the availability of, the user’s internet service
provider or mobile device carrier service, or that the ability to
remotely access and adjust the settings of the Evolution Connex
Control will not be negatively affected by the network--related
modifications, upgrades, or similar activity of the user’s internet
service provider or mobile device carrier service.
Physical Characteristics
Dimensions: See drawing
Appearance: Off--white color
Electrical Characteristics/Communication
Input Volt 24VAC
Each device in the Evolutionr System has a four--pin
connector labeled ABCD. It is recommended that the
following color code be used when wiring each device:
A — Green = Data A
B — Yellow = Data B
C — White = 24VAC (Com)
D — Red = 24VAC (Hot)
Environmental Requirements:
Operating Temperature/Relative Humidity:
User interface and all sensors: 32_F to 104_F/0_Cto40_C,
95% rh non--condensing
Storage Temperature/Relative Humidity:
User interface: -- 40_F to 134_F/--40_C to 56.7_C, 95% rh
non--condensing
Feature Specifications:
Temperature set point range: 50_Fto90_F/4.4_C to 32.2_C
Separate heat and cool setpoints
Programming days: 7 day
Programming periods: Up to 5 periods per day
Smart Setback (with programming)
Touch--N--Gor feature
Non--Programmable
Auto changeover (may be disabled)
Programmable fan (installer selectable)
Humidity Sensor Offsets
Auto Changeover Timer (installer adjustable)
Smart Recovery (in heating and cooling)
Hold function
Copy functions: Copy period, day, zone
Permanent memory
Humidity display and control
Temperature sensor offsets (indoor and outdoor)
TrueSenset Dirty Filter Detection with compatible indoor
equipment
Wiring Requirements:
Power supply: Dedicated 24VAC, 40 va, 60 Hz, via indoor
equipment ABCD Connector. Isolated transformer, field
supplied.
Wiring material: Standard thermostat wire 18 to 24 gauge.