Specifications

ACCESSORIES (Field Installed) (cont)
CHARCOAL FILTER KIT
COLLECTOR
ACTIVE
CARBON
FILTER
The charcoal (carbon) filter kit is available for duct-free high wall fan
coil units. This accessory improves indoor air quality by removing
volatile organic compounds (VOCs), odors, and micro-particles from
the air. The filter kit can be installed either before or after the unit has
been mounted to the wall. Filters must be changed approximately
every 3 months.
POWER VENTILATION KIT
Power ventilation kit provides for up to 10% outdoor air intake capa-
bility for the in-ceiling cassette (619F) units and up to 30% capability
on ceiling-suspended (619C) units. The filter is mounted at the fan
coil unit and filters the outdoor air. A booster fan with speed control
is provided to allow for long duct runs and to balance airflow to the
unit for consistent unit operation.
NOTE: When kit is used on 619C units, fresh air intake kit is also
required.
(TYPICAL FILTER SHOWN)
See Standard Features and Field-Installed Accessories table on page 8 for information on
system features and accessories.
9