Product data

STANDARD FEATURES AND FIELD-INSTALLED ACCESSORIES
STANDARD FEATURE/FIELD-INSTALLED
ACCESSORY
619E
(High Wall)
619C
(Ceiling Suspended)
619F
(In-Ceiling Cassette)
Internal Condensate Pump AA S
Mounting Brackets SS S
Microprocessor Controls S— —
24-V Electro-Mechanical Controls —S S
Cleanable Filters SS S
Charcoal Filter Kit A— —
Programmable Electronic Thermostat —A A
3-Speed Indoor-Fan Motor SS S
Automatic Indoor-Fan Speed Control SS S
Diagnostics SS S
Galvanized Steel Casing (Indoor Unit) —— S
Wired and Wireless Remote Controllers S (WR) S (W) S (W)
Fully Insulated Indoor Unit Cabinet SS S
Automatic Air Sweep SS —
User-Controlled Air Distribution —— S
Power Ventilation Kit —A A
Fresh Air Intake Kit —A A
Auto. Restart Function SS S
Indoor Guard (Discharge Grille) —A —
24-Hour Automatic Start/Stop Timer SA A
50-ft 24 v Control Power Cable —S —
35-ft 24 v Control Power Cable S (018,024) — —
35-ft Power and Control Cable S (009,012) — —
Refrigerant Line Turn Elbow* —S —
High- and Low-Voltage Terminal Blocks (Indoor) SS S
AccuRaterT Refrigerant Metering Device S† S S
Evaporator Coil Freeze Protection SS S
Outdoor Low-Voltage Terminal Block SS S
Crankcase Heater (Reciprocating Compressors) SS S
Crankcase Heater (Scroll Compressor Units)** AA A
High-Pressure Switch* SS S
Low-Pressure Switch* SS S
5-Year Compressor Warranty SS S
Compressor Start Assistance (non-scroll units)* SS S
Cycle-LOC™ Device* SS S
Suction and Discharge Service Taps†† SS S
Totally Enclosed Fan Motor SS S
Acoustically-Lined Compressor Compartment SS S
Winter Start Control* AA A
Low Ambient Temperature Controls (down to −20 F) AA A
Compressor Time GuardT Cycle Protector SS S
Liquid Solenoid Valve* AA A
FIELD FABRICATED ACCESSORIES|
Snow Stand AA A
Ice Stand* AA A
Wind Baffles AA A
Stacking Kit* AA A
Condensing Unit Wall Mount Kit* AA A
LEGEND
A—Field-Installed Accessory
S—Standard from the Factory
W—Wired (24 v)
WR — Wireless Remote
——Not Available on this System
*For size 018 and larger.
†Capillary tubes are standard on 538C009 and 012 systems.
**Crankcase heaters are standard on 538A units without scroll compressors, and are recommended as an accessory for
scroll compressor applications with line lengths over 100 ft and applications using low-ambient kits.
††The 538A units are equipped with 4 taps; one for each service valve, and one each on compressor suction and discharge.
\Drawings available from factory representative.
5