Operation Manual

18
S To reset the counter for your installed accessory, touch the RESET but-
ton, then press SAVE.
S To return to the previous menu, press CANCEL.
A12108
Zone Status (If Applicable)
Zone status allows you to take a quick look at the actual temperatures, and
temperature set points for each zone in your system.
S When you are done looking at your zone status, press DONE.
The system will indicate which mode is running by showing an arrow, which points
to either the heating or cooling set point.
If the system is preparing for the next program period, an indicator will be
displayed to show that the system is moving the temperature toward the next
programmed set point.