User Manual
Intended use: C-Flo is a material heating device that is used to heat composite, local anaesthetic (LA) and
sodium hypochlorite. The device is designed to be used by qualied dental professionals, including, but
not limited to, dentists and dental hygienists. C-Flo must be used with the attachments provided.
C-Flo Pro instructions.
What’s included
• x1 C-Flo Base
• x1 Vane
• x1 Ablative Plate
• x1 Stent Chamber
• x2 Composite Guns
• x1 Power supply unit
• x1 Indicator tag
www.bryant.dental |
| www.bryant.dental
|
V: Vane | S: Stent | A: Ablative Plate
ºc ºc ºc ºc ºc
A 4 mins 6 mins 8 mins 9 mins
10 mins
S 5 mins 7 mins 9 mins 10 mins 13 mins
V 7 mins 9 mins 12 mins 14 mins 15 mins
Insert the USB-C power cable
into the C-Flo base.
Touch and release the C-Flo logo.
Please position the C-Flo Pro on a
surface so that the power supply is
readily accessible to allow it to be
disconnected easily if required.
Switch ON
Getting started
Touch
Changing temperature
To change the temperature quickly touch the C-Flo logo on the base.
The unit will change colour with each touch. Stop when the desired
colour/temperature is active.
When the LED ring around the base of the C-Flo Pro forms a complete
circle of colour without interruptions or movement the C-Flo Pro has
reached and is stable at your selected temperature. This applies to
both increasing and decreasing temperature.
C-Flo Base
Vane
Ablative Plate
Stent Chamber
Please note: Heating times (+/-10%) & temperatures (+/-0,5⁰C) may vary depending on
environmental conditions.