User Manual
Intended use: C-Flo is a material heating device that
is used to heat composite, local anaesthetic (LA) and
sodium hypochlorite. The device is designed to be used
by qualied dental professionals, including, but not
limited to, dentists and dental hygienists. C-Flo must be
used with the attachments provided.
C-Flo Lite instructions.
What’s included
• x1 C-Flo Lite Base
• x1 Power supply unit
• x1 Indicator tag
| www.bryant.dental
|
www.bryant.dental |
LA:
Local anesthetics
Please note: Heating times (+/-10%) & temperatures (+/-0,5⁰C)
may vary depending on environmental conditions.
Changing temperature
To change the temperature quickly touch the C-Flo logo on the base.
The unit will change colour with each touch. Stop when the desired
colour/temperature is active.
ºc ºc ºc
LA 8 mins 9.5 mins 13 mins
4
Hold down the C-Flo logo for 3 seconds until the LED light turns OFF.
Switch OFF
Insert the USB-C power cable
into the C-Flo base.
Touch and release the C-Flo logo.
Please position the C-Flo Pro on a
surface so that the power supply is
readily accessible to allow it to be
disconnected easily if required.
Switch ON
Getting started
Touch