User guide

2
STANDARD FEATURES (cont.)
Gas Heat
S IGC solid--state gas heat exchanger control for on--board
diagnostics, anti--cycle protection, LED error code
designation, burner control logic and energy saving
indoor fan motor delay
S Dedicated 3--5 ton “Low NOx” models available that
meet California Air Quality Management NOx
requirement of 40 nangrams/joule or less. Low NOx
models include stainless steel heat exchangers
S Gas efficiencies up to 82%
S Inducted draft combustion
S Redundant gas valve, with up to 2 states of heating
S Flame roll--out safety protector
S Solid--state electronic direct spark ignition system
Standard Parts Warranty
S 15--year gas heat exchanger parts -- Stainless Steel
S 10--year gas heat exchanger parts -- Aluminized
S 5--year compressor parts
S 1--year parts
PERFORMANCE DATA
Unit Operating Weight lb
Cooling
Gross Total Capacity: Btuh
at Condenser Air Temperature _F
Gross Sensible Capacity: Btuh
Compressor Power Input: kW
Indoor Entering db _Fwb _F
Airflow External Static Pressure in.wg
Indoor Fan Motor Size Hp
Exhaust Fan Motor Size Hp
Curb Weight lb
Heating
Heating Capacity:
Stage 1 Btuh
Stage 2 Btuh
Heating Capacity Total Btuh
Stage 1 kW
Stage 2 kW
Heating Capacity Total kW
ELECTRICAL DATA
Power Supply to Unit Volts Phase Hz
Minimum Circuit Amps Maximum Overcurrent Protection
SUBMITTAL DATA
Job Name
Architect
Engineer
Contractor
Unit Designation
581J