Specifications

4
Table 1 – Detector Indicators
Control or Indicator Description
Magnetic test/reset switch Resets the sensor when it is in the alarm or trouble state. Activates or tests the sensor when it is in
the normal state.
Alarm LED Indicates the sensor is in the alarm state.
Trouble LED Indicates the sensor is in the trouble state.
Dirty LED Indicates the amount of environmental compensation used by the sensor
(flashing continuously = 100%)
Power LED Indicates the sensor is energized.
Magnetic
test/reset
switch
Alarm
Trouble
Power
Dirty
C07297
Fig. 2 -- Detector Assembly
Alarm
Power
Test/reset
switch
Trouble
C07298
Fig. 3 -- Controller Assembly
Fastener
(2X)
Controller cover
Conduit nuts
(supplied by installer)
Conduit support plate
Cover gasket
(ordering option)
Conduit couplings
(supplied by installer)
Terminal block cover
Controller housing
and electronics
C07299
Fig. 4 -- Controller Exploded View
HKRNKA