Instruction manual

3. Apply Gas Conversion Label.
a. For Single Stage Furnaces, apply label 327697-203 to burner box cover as shown. (Do not use 327697-202 which is similar)
b. For two-stage gas valve that was converted by replacing the regulator spring (Fig. 22C) apply label 327697-203.
c. For two-stage gas valve that was adjusted (Fig. 22D) apply label 327697-202.
4. Reinstall main furnace door.
Fig. 28—Burner Flame
A89020
BURNER FLAME
BURNER
MANIFOLD
7/8”
A02150
Fig. 29A—Position of Igniter to Burner (Section 1)
9/32”
11/32”
A02150
Fig. 29B—Picture of Igniter to Burner (Section 1)
—29—