User guide

84
10-2-5. EMS (Eco Management System)
The data that the BRX uses the EDA (Eco Driving Analyzer) in addition to the PC
Viewer to further analyze driving data. It also has an EMS Alert Unit that can be
used to display alarms when driving is not economic or safe.
SD Record
Type
The default is set to “DTEG” and should not be changed unless
advised by D-TEG or your supplier.
Overwrite When checked, if the SD card reaches its maximum EMS data
capacity it will continue to record by overwriting the oldest
data.
Max Size (MB) The SD card can hold multiple data types and this sets the
maximum storage capacity for EMS data only.
Max count The SD card can hold multiple data types and this sets the
maximum number of EMS data.
EMS Alarm
Device
Check the box if you are using the EMS Alarm Device
G-Sensor - Set the trigger point for g-sensor values.
- If checked the g-sensor light will illuminate when
this alarm is triggered
Overspeed - Set the trigger point for speeding.
- If checked the speeding light will illuminate when
this alarm is triggered
Over RPM - Set the trigger point for excessive RPM value.
- If checked the RPM light will illuminate when this
alarm is triggered.
Idling - Set the trigger time for idling.
- If checked the idling light will illuminate when this
alarm is triggered.
Buzzer If checked, a buzzer will sound with all alarms.