User guide

79
10-2-3-3. Signal
The BRX can use the car signals as triggers such as turn lights, brake, and
reverse.
Title The default title is set as Left, Right, Brake, and Reverse but
this can be renamed (Max 10 digits) as required.
Record CH - Select the cameras that you wish to record when the motion
sensor is triggered.
- For example, you can choose camera 1 and 2 to record when
motion is detected in camera 1.
- The Record CH boxes: “▢▢▢▢▢▢▢▢”are Channels 1 to 8 starting
from the left to the right.
- Only the channels that are checked in the Device Menu can be
selected.
AlmOut1, 2 - An output alarm, such as a siren, can be used.
- Select from “N/A (0), 1, 5, 10, 20, 30, 30, 50, 60, and ∞
seconds”.
LiveoutCH/
Duration
- If you have a monitor connected, a video output can be used.
- Select how you wish the display layout should be from “1 / 2 /
3 / 4 / 5 / 6 / 7 / 8 / 2×2-1 / 2×2-2 / 3×3”
* If multiple motions are detected the BRX will follow the
Liveout Priority setting. Refer to section 10-2-3-5.
Duration Select how long you wish to display from “5, 10,20, 30, 30, 50,
60, and ∞ seconds”