User guide

77
10-2-3-2. AlarmInput
Seven additional alarm inputs can be given to the BRX. This is the configuration
menu for these inputs.
Input
Channels
Check the boxes for the alarms that will be used
Title Use the alphabet and numbers to rename (max 10 digits) the
alarms. The new names will be displayed on the live screen and
all recordings.
Type Alarms 1～4 are voltage types and can be set to trigger when
“V-Off/V-on”, 5～7 are open-close types and can be set to
trigger when “N-O/N-C”.
*If you wish to connect a panic alarm trigger, you must use
alarm number”7”.
Record CH - Select the camera(s) that you wish to record when the motion
sensor is triggered.
- For example, you can choose camera 1 and 2 to record when
motion is detected in camera 1.
- The Record CH boxes: “▢▢▢▢▢▢▢▢”are Channels 1 to 8 starting
from the left to the right.
- Only the channels that are checked in the Device Menu can be
selected.
AlmOut1, 2 - An output alarm, such as a siren, can be used.
- Select from “N/A (0), 1, 5, 10, 20, 30, 30, 50, 60, and ∞
seconds”.
LiveoutCH/
Duration
- If you have a monitor connected, a video output can be used.
- Select how you wish the display layout should be from “1 / 2 /
3 / 4 / 5 / 6 / 7 / 8 / 2×2-1 / 2×2-2 / 3×3”
* If multiple motions are detected the BRX will follow the
Liveout Priority setting. Refer to section 10-2-3-5.