User guide

76
buttons on the bottom.
Record CH - Select the camera(s) that you wish to record when the motion
sensor is triggered.
- For example, you can choose camera 1 and 2 to record when
motion is detected in camera 1.
- The Record CH boxes: “▢▢▢▢▢▢▢▢”are Channels 1 to 8 starting
from the left to the right.
- Only the channels that are checked in the Device Menu can be
selected.
AlmOut1, 2 - An output alarm, such as a siren, can be used.
- Select from “N/A (0), 1, 5, 10, 20, 30, 30, 50, 60, and ∞
seconds”.
LiveoutCH/
Duration
- If you have a monitor connected, a video output can be used.
- Select how you wish the display layout should be from “1 / 2 /
3 / 4 / 5 / 6 / 7 / 8 / 2×2-1 / 2×2-2 / 3×3”
* If multiple motions are detected the BRX will follow the
Liveout Priority setting. Refer to section 10-2-3-5.
Duration Select how long you wish to display from “5, 10,20, 30, 30, 50,
60, and ∞ seconds”