User guide

74
Pre and Post times are only valid in event recording mode.
Password An additional password can be set for the recorded data using a
4 digit password from 1000 ~ 9999. If a password is set, keep
a record in a safe place. Without the password, you will not be
able to view the data.
Overwrite If this box is checked, when the HDD or SSD is full, it will start
overwriting from the oldest data. If the box is not checked, the
BRX will stop recording.
SD
EventRecord
Panic Button When the panic button is pressed, it will
record on the SD card.
G-Sensor When the g-sensor is triggered, it will
record on the SD card
Overwrite If this box is checked, when the SD card is
full, it will start overwriting from the oldest
data. If the box is not checked, the BRX will
stop recording.
Max Size (MB) This is the maximum amount of video data
that can be recorded on the SD card. This is
to ensure there is enough room for EDA
data and other non-video data.
Max Count This is the maximum number of video data
files that can be recorded on the SD card.
This is to ensure there is enough room for
EDA data and other non-video data.
Pre This sets the pre-recording time on the SD
card. You can select from “0(N/A) to 15
sec”.
Post This sets the post-recording time on the SD
card. You can select from “0(N/A) to 15
sec”.
Dual Record If this box is checked, all video will be recorded on both the
SSD (or HDD) and the SD card (*On the SD card, regardless of
the FPS setting, only 1 FPS will be recorded per channel).
Overwrite If this box is checked, when the SD card is
full, it will start overwriting from the oldest
data. If the box is not checked, the BRX will
stop recording.
Max Size (MB) This is the maximum amount of video data
that can be recorded on the SD card. This is
to ensure there is enough room for EDA
data and other non-video data.
Max Count This is the maximum number of video data
files that can be recorded on the SD card.
This is to ensure there is enough room for
EDA data and other non-video data.