User guide

72
10-2-2. Record
Recording setting including resolution, FPS, quality, can be configured here.
Start by selecting either the SD EventRecord, Dual Record, or neither, on the
right hand side, as they will influence the range of options for other settings.
Then select the Resolution on the upper right side as this will set the maximum
amount of Frames Per Second (FPS) on the left side.
Recording FPS
(Frame rate)
- Since the SD card is For each Resolution,
the total number of frames is limited.
D1：60 frames
HD1：120 frames
CIF：240 frames
＊If resolution is set as CIF you can record
real-time (30 FPS) for all cameras.
- Each channel can be set from “1 to 30”
FPS.
- FPS used shows the current used frames/
Note!
The SD EventRecord and Dual Record settings decide what data and at what frequency
the data is saved on the SD card. All data will be recorded on the HDD at the set FPS
regardless of this setting. If SD EventRecord is selected, it will create a copy of the data
on the SD card depending on how it is configured. If Dual Record is selected, it will
automatically make a copy of the date on the SD card at 1 FPS, regardless of the
selected FPS setting.