User guide

70
10-2-1. Device
Configuration for Camera, Car Pulse, G-sensor, and External Devices.
Camera Check Box Check all the cameras you wish to use
Cam Title Use the alphabet and numbers to rename
(max 10 digits) the cameras. The new
names will be displayed on the live screen
and all recordings.
Brightness Set the brightness from 10 to 100
Contrast Set the contrast from 10 to 100
* The brightness and contrast may be better set on the main
unit with a monitor as you can adjust while viewing.
Default Layout ‐ Select the camera view layout that you wish to start with
among: “1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 2×2‐1 / 2×2‐2 / 3×3”
‐”2×2‐1”is cameras 1～4 split into 4 and “2×2‐2” is cameras
5～8 split into 4
Apply
Tachometer
Data
- The BRX is compatible with various Tacho devices
- If using data drawn from a Tacho, check the data here.
Remote
Controller
- N/A: if remote controller is not used.
- Internal IR: if the reader on the main unit is used
- External IR: if an external reader is connected and used
Car Pulse Type - Check the vehicle’s car pulse type and
select from “2/4/8/16/20/25”
Standard - Check the vehicle’s car pulse standard and
select from “JIS 4W/JIS 2W,3W/SAE/DIN/
BNA”
RPM - Check the vehicle’s RPM type and select from “1~10”
G-Sensor Axis X, Y, Z - Refer to the axis adjustment in Addendum