User guide

50
 Select the search options “Normal/ Event/ Other sub-options” from the left
bottom corner. The dates that have recorded video data for that option will be
filtered and are highlighted in blue. Choose the date you wish to check. The
chosen date will be highlighted in yellow.
＊ Search options
- Normal: Normal recorded data
- Event: Event recorded data
- Motion: Data with activated motion triggers
- Signal: Data with activated signal (turns, brakes, etc.) triggers
- G-sensor: Data with G-sensor (acceleration/ deceleration) values that
exceed pre-set G-sensor limit
- Speed: Data with speeds that exceed the pre-set speed limit
- Video Loss: Data with video loss
 When a date is selected, the hours (from 0 ~ 24) with recorded data will be
highlighted in orange, for each camera and when the hour is selected, the
minutes (from 0 ~ 60) with recorded data will be highlighted in orange, for
each camera. Choose the minute you wish to start your search. The selected
hour and minutes will be highlighted in blue.
 Click the [Search] button in the right bottom corner to access the recorded
data.