User guide

42
- Copy the new firmware into the “dvr_program” folder.
- Extract the SD card (or USB Memory stick) and insert it into the main unit.
- In the upgrade menu, choose which media “SD card/USB(Rear)”you will use
to upgrade and press [MENU].
- The device will start upgrading immediately and once upgraded, the device
will automatically reboot.
* If both SD card and USB memory stick is inserted, priority usually goes to
the SD card unless it is specifically chosen.
 CONFIGURATION
- Press [MEMU] to reset to factory default.
- Use the arrow keys to select “YES” and press [MEMU] again to confirm.
 VIDEO STANDARD
- Select which the video standard for your country “NTSC/PAL”.
Caution!
Do not disconnect the device while upgrade is in progress as it may damage the product.
If this happens, please contact your dealer.
Caution!
If the video standard is incorrectly chosen, the recording and live video may be
distorted, please check the standard if this happens.