User guide

40
- If set for a specific time: “0～23”, time will synchronize at that time. In
addition, if the GPS time cannot be found at that time, the device will
automatically synchronize as soon it has reception.
 SPEED UNIT
- This component can only be set using the PC Viewer.
 LANGUAGE
- The BRX2000 series offers these language settings “English/ Korean/
Japanese/ Chinese/ Simplified Chinese/ Russian/ Portuguese”
3-3-2. SYSTEM / USER MANAGEMENT
 DVR ID
- A maximum of 10 characters (either alphabet or numbers) can be used to
create a DVR ID. For simplicity, some just use the vehicle number but if
multiple devices are used in the same vehicle please use a separate DVR ID.
- The DVR ID is recorded on all data and can be used to identify and
differentiate the source of the data.
 USER ID
- The user ID is read from the SD card and can only be set using the EDA
software.
- When the SD card with the user ID is plugged in, the user ID will
automatically be read and displayed.
 PASSWORD
- An 8-digit password can be set using the arrow keys.
- The factory set password is the sequence [>], [<], [∨], and [∧].
- Press menu to change the password. The password sequence will be needed
to be typed twice before an OK is displayed and the password is set.
- Leave the password setting space blank if you do not require a password.
3-3-1. SYSTEM / SERVICE
Caution!
Keep your passwords in a safe place as if lost, you will not be able to access any the
menu