User guide

39
 Important configurations such as date, language, password, format, default
settings can be set here.
 When changing certain configurations, side effects such as data loss, video
loss, or limited access may occur. So please use caution when changing any
system settings.
3-3-1. SYSTEM / DATE/TIME/LANGUAGE
 SYSTEM TIME: Configures date and time.
- Press the [MENU]. When the year is highlighted in red use the [∨] and [∧]
keys to change the year.
- After setting the year use the [<] and [>] keys to move and set the month,
day, and time.
- The changed system date and time will be applied immediately but all other
settings will be applied after you exit the menu.
- When a GPS module is connected and the time is set to automatically
synchronize with the GPS time, there is no need to set this component.
 DATE FORMAT
- Select between: “YYYY-MM-DD/MM-DD-YYYY/DD-MM-YYYY”.
 TIME FORMAT
- Select between “12H/24H”
* At 2:40 PM, if set to 12H, time will be displayed as PM 02:30, if set to 24H,
time will be displayed as 14:30.
 TIMEZONE
- The time zone needs to be set accurately if synchronizing automatically to
GPS time.
- If automatic GPS time synchronization is not used this setting is not
required.
 DST (Daylight Savings Time)
- Activate if you daylight savings time is in effect
 TIMESYNC
- Sets the time when the device should synchronize with the GPS time.
- Select between “OFF/On Booting/0 O’clock～23 O’clock”.
- If set to “OFF”, time will not be synchronized.
- If set to “On Booting”, time will synchronize whenever the device boots. In
addition, if the GPS time cannot be found at time of booting, the device will
automatically synchronize as soon it has reception.