User guide

33
- This sets the initial screen that will be displayed at power on and can be
chosen among these options: “1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 2×2‐1 /
2×2‐2 / 3×3”
- “2×2‐1” will show channels 1 ~ 4 split into 4 screens and “2×2‐2” will
show channels 5 ~ 8 split into 4 screens.
 EMS Alert Unit
- USE: Select “ON” using the [>] and [<] keys.
‐ ACC/DEC VALUE: The G-sensor Warning Light on the EMS Alarm Display Unit
will illuminate when the G-sensor senses momentum exceeding the set level.
Levels can be adjusted from 0.1G to 1.0G.
- SPEED VALUE: The Speed Warning Light on the EMS Alarm Display Unit will
illuminate when the speed exceeds the set level. The level can be adjusted
from 000 to 999 using the arrow keys.
‐ RPM VALUE: The RPM Warning Light on the EMS Alarm Display Unit will
illuminate when the RPM exceeds the set level. The level can be adjusted
from 0000 to 9999 using the arrow keys.
- IDLING TIME (MIN): The Idling Warning Light on the EMS Alarm Display
Unit will illuminate when the driver idles for more than the set time. The time
is in minutes and can be adjusted from 000 to 999 using the arrow keys.
- BUZZER: When set to “ON”, a buzzer will sound in addition to the
illumination for all alarms.
3-1-6. DEVICE/ EXTERNAL DEVICE
Note
The EMS Alert Unit is an optional accessory and can be purchased separately.