User guide

32
3-1-4. Device / Remote Control
 You can activate and deactivate the remote control using the [>] and [<]
keys.
 When activated, the remote control receiver needs to be chosen between
“Internal” when using the infrared receiver on the device itself and
“External” when using an optional external receiver. When a remote control
is not in use, set to “OFF”.
＊The external receiver is an optional accessory and can be purchased separately.
＊To utilize an external receiver, connect the receiver to the serial port #2,
marked S2, and in the “EXTERNAL DEVICE” setting section, configure
“SERIAL2 – DEVICE” to “EXTERNAL IR”.
3-1-5. Device/ Display
 Default Screen
CAUTION!
Never install the BRX2000 device with the front facing down. This will lead to SSD
recording malfunctioning and damage to the device.