User guide

26
 Camera Title: Each camera can be named separately, e.g. use or location,
using a maximum of 10 characters.
 Brightness： Adjust using [>] and [<] keys, higher is brighter
 Contrast: Adjust using [>] and [<] keys
 Use the [ESC] key to return to the “DEVICE” screen.
3-1-2. Device / Signal
 Carpulse Type
‐ Check the carpulse type and use the [>] and [<] keys to set the correct kind
among “2/4/8/16/20/25”
 Carpulse Standard
‐ Check the carpulse type standard and use the [>] and [<] keys to set the
correct kind among “JIS 4W/JIS 2W,3W/SAE/DIN/BNA”.
- The Carpulse Standard Value will change with the standard chosen.
 RPM Pulse Type
‐ Check the carpulse type standard and use the [>] and [<] keys to set the
correct kind among “1~10”.
Note
1. The channels that are turned off cannot be viewed live nor will it be recorded.
2. When there is a recording failure, the video loss icon will show on the channel’s live
screen and the alarm LED will light up.
3. When a channel is activated without a connected camera, the video loss icon will
show on the channel’s blank screen and the alarm LED will light up. To avoid this,
please turn off all channels that are not being used.