User guide

23
i. Left turn signal: Left
ii. Right turn signal: Right
iii. Brake pedal: Brake
iv. Reverse gear: Reverse
v. Emergency: Left & Right
* Multiple signal display is possible
⑨ G-Sensor
* When installing your device, configuring your G-sensor is essential. Refer to
Appendix B for the configuration values and select the correct angle setup for
each axis.
⑩ RPM: Displays engine RPM measured by RPM pulse.
* If the RPM indicated here varies with the RPM gauge, please re-configure
the RPM pulse type by going to [Menu -> Device -> Signal -> RPM Pulse
Type] and selecting the correct type.
3. MAIN MENU
1) To access Menu, press [MENU] and the default password: [>][<][∨][∧].
The password can be changed, refer to the below Notice box.
2) After typing the password, press [MENU] again and the below screen will
show.
3) Within Menu, there are three directories: Device, Record, and System.
4) Use [>] and [<] to change directories.
Note
The values on the Information Screen refreshes every second, please give ample time
for the device to display before changing the values or settings.