User guide

⑨ BUTTON

[SER] : Searches the recorded data.

[CH] : Changes the camera on display.

(Camera 1 → Camera 2 → Camera 3 ->.... ->Camera 8 → Camera 1)

[ESC] : Cancels or exits from the selected modes or menus.

[MENU] Enters into the menu.

[FN] : Funtion Key: used in combination with other buttons as follows;

FN + UP: Uploads the configuration file (operation settings, saved from the

DVR Viewer software through the USB memory stick.

FN + DOWN: Downloads the configuration file (operation settings) of the

current BRX to USB memory stick.

[STA] : Displays current status of BRX DVR operation.

INFORMATION: shows firmware version, GPS acceptance, Car Signal, G-

Sensor)

[Arrow/ Direction]: Moves the highlight between items in the setting menu.

Change the live display layout: Left arrow(8 channels ), Right arrow( 4

channels)

INTRODUCTION

FRONT

[Time Delay Function]

In case of Power On /Off by ACC signal in vehicle;

Time delayed start

Off → On : Starts BRX 5 seconds later and booting is completed in 47 seconds.

Time delayed shutdown

On → Off : Stops recording immediately (record LED off) and shutdown takes

75 seconds till completed (power LED off)