To The Owner Thank You Thank you for purchasing this Pulsar String Trimmer. twas carefully engineered to provide excellent performance when drapery operates and maintained. Please read this entire manual prior to operating the equipment. it instructs you how to safely and easily set up, operate and maintain your machine. Please be sure that you, and any other persons whe will operate the machine, carefully follow the recommended safety practices at all times.
Important Safe Operation Practices 2 WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol.
not put hands of feet near or under rotating parts. Keep clear of discharge ares ot all times #s the rotating spindle and trimmer lines can cause injury. Ever operate the string trimmer without proper shields, guards, contra lever or other safety protective devices in place and working. Never operate the string trimmer with damaged safety devices. Failure to do so, tan result in personal injury.
Use easterner care when approaching blind corners, doorways, shrubs, trees, or other objects that may obscure your vision of a child who may run into the string trimmer. Keep children sway from hot or running engines. They can suffer burns farm a hot muffler. Never allow children under 14 years of aga to operate this machine.
Safety Symbols This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and aerate. Symbol BT READ THE OPERATOR'S MANUAL) Rewed, understand, snd follow all instructions in the manuals) before attempting to assemble and operate e f}» EYE PROTECTION Always wear safety glasses or safety goggles when operating this machine, DANGER — BYSTANDERS Do not trim when children or others are around.
DESCRIPTION OF PRODUCT PARTS wn remove the machine from its packaging and check that the following pairs are complete: A: Main trimmer deck (with upper handle and lower handle) 1pc B: Middle handle 1pc C: Trimmer line bag 1pc D Trimmer line pests E: Manual 1pc F: Knob with bolt M8 apes G: Bolt M6 pests H: Cable clip 1pc
Assembly & Set-Up Contents of (carton One String Trimmer B One Pack of Tetrameter Line . One String Trimmer Operator's Manual Assembly HOT: This string trimmer is shipped without gasoline or oil in the engine, Fill up the gasoline and oil as Instructed In the accompanying engine manual BEFORE operating your machine. #idle Handle 1. Remove the triangle knot and carriage bolt from the Left lower handier and the right lower handle.
Starter Rope Set-Up 1. Disconnected the spark plug boot from the spark plug. Bias and Ol Fill-Up 2 Pivot the control handier against the upper handle and pull the rape out of the engine, 3. Southeastern rope into the hook. See Figure 3-3. 1. Add ol provided before starting unit for the first time out of the box. WARNING: Use extreme care when handling gasoline, Gasoline is extremely flammable and the vapors are explosive, Aver fuel the machine indoors or while the engine Is hot or running.
Controls and Features 4 Control Lever Re coll Starter Trimmer Line Antimatter Shield . Figure 4-6 Recoil Starter Spindle The recoil starter is attached to the right side of the upper The spindle rotates the trimmer fine. handier. Stand behind the unit and pull the recoil starter rope to . . start the unit. Trimmer Line 4 3 The trimmer line is attached to the spindle assembly and iris Trimmer Shield used to im grass, vegetation, undergrowth and weeds.
Operation Adjusting the Spindle Height The spindle height can be adjusted for various applications. To do 5o, proceed as follows: 1, Loosen the bolt found on side of the spindle shaft, H Mote: The bolts are designed so that they cannot be removed from the spindle shaft, 2 Slide the spindle upward or downward to the desired position before re tightening the bonks (D and nut®. Sea Figure 5-1. (Note: bolts must be tightened with the spindle when starting the equipment } Figure 5-1 Starting and Stopping 1.
Maintenance & Adjustments Maintenance General Recommendations . Always observe safety rules when performing any maintenance, . The warranty on this string trimmer doss not cover items that have been subjected to operator abuse or negligence. Ta receive full value from warranty, aerator must maintain the string trimmer as instructed here, Changing of engine-governed speed will void engine warranty. . All adjustments should be checked st least once each season. .
Troubleshooting Problem Engine runs erratic . Spark plug boot aloes. . Blocked fuel line or stale fuel, L Dentin gas cap plugged. . Water or dentin fuse stern, . Dirty air cleaner, . Unit running with CHOKE (f equipped) Cantonal skips hesitates) at high speed Excessive Vibration applied. . Spark plug gap too close. . Spindle wing nuts looses. . Spindle damaged. 14 . Conductance tighten spark pig boot. . Clean fuel ling Till tank with clean, fresh gasoline. . Clear vent, .
Warranty 8 PULSAR PRODUCTS Limited to 2 Year Warranty: From the date of original purchaser, Pulsar Products Inc. warrants fo the original purchase, that each trimmer product sued, shall be free from defect in malarial and workmanship for a period of 2 years. Pulsar Products Inc., at ifs discretion, agrees to repair or replace any defective part that upon examination, inspection, and testing by & Pulsar Products Inc. authorized serves dealer, is found to be defective within the origin! warranty period.
Warranty 8 V Whet this Warranty Doss Not Cover: » Normal wear: This warranty excludes normal wear firms such as fighters, spark plugs, gaskets, O-dings, and wheals + Maintenance: This warranty does not apply to duns-ups or routine maintenance and does not cover any adjustments or repairs not performed by an authorized repair facility.
