Warranty Guide

Rev: 5 06/2016 Brush Master™ Chipper/Shredder with 2-Way Feed
2
T
Training
1. Read, understand, and follow all instructions on the
machine and in the manual before attempting to
assemble and operate. Keep this manual in a safe
place for future and regular reference and for
ordering replacement parts.
2. Be familiar with all controls and their proper
operation. Know how to stop the machine and
disengage controls quickly.
3. Never allow children under 18 years old to operate
this machine. Children 18 years old and over should
read and understand the operation instructions and
safety rules in this manual and should be trained and
supervised by a parent.
4. Never allow adults to operate this machine without
proper instruction.
5. Keep bystanders, helpers, pets, and children at least
75 feet from the machine while it is in operation. Stop
machine if anyone enters the area.
6. Never run an engine indoors or in a poorly ventilated
area. Engine exhaust contains carbon monoxide, an
odorless and deadly gas.
7. Do not put hands or feet near rotating parts or in the
feeding chambers and discharge opening. Contact
with the rotating impeller can amputate fingers,
hands, and feet.
8. Never attempt to unclog either the feed intake or
discharge opening, or inspect and repair the machine
while the engine is running. Shut the engine off and
wait until all moving parts have come to a complete
stop. Disconnect the spark plug wire and ground it
against the engine.
Chipper/Shredder Model # Specifications
Warnings
Product Specifications
NOTE:
The operator or
user is
responsible for
accidents or
hazards
occurring to other
people, their
property, and
themselves.
Model# CH6 CH8 CH10 CH11
Maximum RPM 3600RPM 3600RPM 3600RPM 3600RPM
Torque 8 Ft Lbs 12 Ft Lbs 17.7 Ft Lbs 17.7 Ft Lbs
Emission Compliance 48 state 48 state 50state 50 state
Fuel Capacity (gal.) 0.87 1.3 1.72 1.72
Oil Capacity (Qts) 0.6 1.1 1.1 1.1
Engine Type DEK DEK DEK DEK
Displacement (cc) 212cc 270cc 457cc 457cc
Chipper Yes Yes Yes Yes
Shredder Yes Yes Yes Yes
Maximum cung
Thickness Diameter (in.)
2.25" 3" 5“×3.5” 5“×3.5”