Specifications

Show Track List
- See the Track List help for details.
Selected Track Properties
- Shows the Track Properties dialog, see Track Properties help for
details.
Move track Up
- Moves the selected track up in the list.
Move Track Down
-
Moves the selected track down in the list. In some cases track 1 needs to be
cleared so a new track can be loaded. If the track already in track 1 needs to be kept then the best
method is to move an empty track up into its place.
A menu with additional options
Track Replay
- See the Replay Track Control help for details.
Track Profile -
For plotting the track profile of altitude or speed against distance or time. See
the Track Profile help for details.
Track Filter Control -
For reducing the number of points in a track by filtering based on
various parameters. See the Track Filter help for details.
Track Move Control
- See the Move Track Control help for details.
Track Reverse
- Reverses the order of track points in a track.
Add Date/Time to Track Points
- Adds the date and time to each track point. The start date
and time can be entered and the time between each track point. This only works correctly if the
track was collected at specified even intervals of time. Even if the track was collect at
specified even intervals of time there is no guarantee that the GPS collected them at those
precise intervals so there will be steps in the speed and distance calculations.
Split Track 1 into Separate Tracks for Each Track Section
- Many tracks are divided up into
sections (consecutive track points are not joined), this option splits the track putting each section into
a new track. There is a limit of 74 sections.
Increases and decreases the height of the Track Control window.
Track List
Page
185
of
252
OziExplorer Help Contents