Specifications

Configure a map fix so Atlas can find your position on a printed chart or to-
pographical map.
Press ↓ to SELECT ORIGIN|ENT|ENT (MY WAYPOINTS) if you saved the refer-
ence point as a waypoint. Select the waypoint name that you assigned to
the reference point and press
ENT. The unit displays a waypoint informa-
tion screen with the command
SET AS ORIGIN selected; press ENT and the
unit returns to the Configure Map Fix menu. Finally, press EXIT to erase
this menu. Now press ↑ to
COORD SYSTEM|ENT, select MAP FIX from the list
and press
ENT. All position information now shows as a distance from the
reference point you chose.
Customize Page Displays
The Position, Navigation, and Map pages all have customizable options
that are available in Advanced Mode. These options decide which informa-
tion is viewable on each page.
Customize Position Page
This page has seven boxes you can customize. While on the Position
Page, press
MENU|↓ to CUSTOMIZE|ENT. The topmost data box begins flash-
ing. Use the arrow keys to select the box you want to change. With the
display box highlighted and flashing, press
ENT to open a list of options.
Scroll ↓ or ↑ to select a different data option, then press
ENT.
You can repeat these steps to change the display in another box. When all
your changes are finished, press
EXIT to return to the page display.
Customize Navigation Page
While on the Navigation Page press
MENU|↓ to CUSTOMIZE|ENT. Press ↓ or
↑ to select a display option. With the option highlighted, press
ENT to
check it (turn on) and uncheck it (turn off.) After all options are set, press
EXIT to return to the page display.
Customize Map Page
While on the Map Page press
MENU|↓ to CUSTOMIZE|ENT. Press ↓ or ↑ to
select a display option. With the option highlighted, press
ENT to check it
(turn on) and uncheck it (turn off.) After all options are set, press
EXIT to
return to the page display.
71