Specifications

Edit a Trail Name

To edit a trail name: press

MENU|MENU|↓ to MY TRAILS|ENT|↓ to trail

name|

ENT|ENT. Press ↑ or↓ to change the first character, then press → to

the next character and repeat until the name is correct. Press

EXIT|EXIT|EXIT|EXIT to return to the previous page display.

Transfer Custom Maps and GPS Data Files

Custom Maps:

Custom maps work only from the MMC card or SD card. When a card con-

taining a Custom Map File is loaded into the unit, it automatically loads the

map into memory when the unit is turned on.

Instructions for copying Custom Map Files to an MMC are contained in the

instruction manual for your MMC card reader and MapCreate software. For

instructions on inserting an MMC into the Atlas, see Sec. 2, Installa-

tion/Accessories.

GPS Data files:

GPS Data Files contain waypoints, routes, trails and event marker icons.

Instructions for copying GPS Data Files between your computer and an

MMC are contained in the instruction manual for your MMC card reader

and MapCreate software.

GPS data automatically recorded in the unit's internal memory must be

saved to the MMC (as a GPS Data File) in order to store it on your per-

sonal computer. GPS Data Files stored on an MMC must be copied from

the card to the Atlas's internal memory before the unit can read them.

Here's how:

1. Insert the MMC into your unit. Press

MENU|MENU|↓ to SYSTEM

SETUP|ENT|↓ to TRANSFER MY DATA|ENT.

2. The Transfer My Data menu includes a message which tells you if an

MMC is present or not. If no MMC is present, you must first insert a card

into the Atlas in order to activate the Load or Save commands.

To transfer data from the Atlas to the MMC: press

ENT (for SAVE.)

To transfer data from the MMC to the Atlas: press → to

LOAD|ENT.

3. Saving to MMC: To accept the default name "Data" for the GPS Data

File, press ↓ to

SAVE DATA|ENT. If you wish to rename the file, press ENT to

activate the selection box. Press ↑ or ↓ to change the first character, then

press → to the next character and repeat until the name is correct. Then,

press

ENT|↓ to SAVE DATA|ENT.

The unit will display first a progress then a completion message when the

data transfer is finished. To return to the Page view, repeatedly press

EXIT.

4. Loading to unit memory: There may be more than one GPS Data File