Specifications

4. 5. 6.

Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp turn. Fig.

5. Waypoint (4) set at highway exit to frontage road leading to river. Waypoint

(5) ends the route at a tree. Fig. 6. Press EXIT to save the route and you re-

turn to this screen.

5. Move the cursor to the next point in the route, a spot where you need to

turn or change direction, and press

ENT to set the next waypoint.

6. Repeat step five until the route reaches your destination.

7. To save your route, press

EXIT. Atlas reverts to the Route screen, with

the route automatically named "Route 1" and stored in Atlas's internal

memory.

8. You can edit the name if you wish. Press ↑ to select the screen's com-

mand box, then press → to

EDIT NAME|ENT. Press ↑ or ↓ to change the first

character, then press → to move the cursor to the next character and re-

peat until the name is correct, then press

ENT.

9. You can execute other route commands, such as

NAVIGATE. With the

command box active, just press → to highlight a different command, then

press

ENT.

10. If you are finished with the route for now, you can return to the

last page displayed by pressing EXIT|EXIT|EXIT.

Delete a Route

1. From the

NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press

MENU|MENU|↓ to ROUTE PLANNING|ENT.

2. Press ↓ to the route list|press ↓ or ↑ to select route name|

ENT.

3. Press ← to

DELETE|ENT|← to YES|ENT.

Save GPS Data Files to an MMC

2. The Transfer My Data menu includes a message which tells you if an

MMC is present. If no MMC is present, you must first insert a card into At-

las in order to activate the Save command.

3. To save data from Atlas to the MMC: press ENT (for SAVE).