Specifications

3. Saving: To accept the default name "Data" for the GPS Data File, press
↓ to
SAVE|ENT. If you wish to rename the file (as in the example below),
press
ENT to activate the selection box. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the name is
correct. Then, press
ENT|↓ to SAVE|ENT.
The unit will display first a progress then a completion message when the
data transfer is finished. To return to the Page view, press EXIT|EXIT.
From left to right, these figures show the menu sequence for naming and
saving a GPS Data File from an MMC into Atlas's memory.
4. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
ENT to activate the selection box, use ↓ or ↑ to
highlight the file, then press
ENT to accept the selection. Next, press ↓ to
LOAD|ENT. The unit will display a completion message when the data trans-
fer is finished. To return to the Page view, press
EXIT|EXIT.
From left to right, these figures show the menu sequence for loading a GPS
Data File from an MMC into Atlas's memory.
40