Specifications

1
Foul Detectors
6
Foul Detectors
Double Unit
Single
Unit
Aisleway/Pillars
Ball Return
Ball Return
Ball Return
Single
Unit
Single
Unit
Single
Unit
Reflector included
in ZOT Kit
Original Cover
ZOT Foul Detector
Features & Benefits
Infrared Technology: ZOT Wizard Foul Units fea-
ture infrared sensors that are solid state and
rated for millions of hours of dependable serv-
ice. Infrared sensors replacing troublesome
incandescent bulbs.
Self Diagnostics: ZOT’s microprocessor auto-
matically checks the sensors every time there is
a foul. If any Wizard Foul Unit detects a problem
it will automatically turn itself off …….one lane
at a time.
Alignment Indicators: A 4-unit LED system indi-
cates signal strength. This aids the installer
and/or mechanic in the alignment of the sen-
sors.
All Modular Design: All the individual compo-
nents simply plug onto the PC Board, making
troubleshooting and the replacement of parts
simple.
Vibration Protection: The PC Board is mounted
on a shock-absorbing buffer to minimize ball
impact vibration that can damage delicate cir-
cuitry common to PC Boards.
Marginal Signal Alert: ZOT Wizard Foul Units will
alert the mechanic to pending problems. Four
different sequences of buzzer actions can occur
if the unit has a failure allowing the mechanic to
troubleshoot.
Microprocessor Efficient: All ZOT Wizard Foul
Units have State-of-the-Art Microprocessor tech-
nology. This simplifies the circuitry, making all
Wizard Units more cost effective and reliable.
Automatic Scoring Compatible: ZOT Wizard Foul
Units transmit the proper signal needed to com-
municate with automatic scoring systems.
Changing the signal is as easy as: either flip-
ping a switch or moving jumpers to a different
set of pins.
No need for an Electrician to Install: The ZOT
Wizard (Surface) comes with a Transformer and
Low Voltage supply cable allowing a Mechanic
to complete the installation with no added help.
Light Source Recognition: ZOT’s infrared design
features a special operational frequency for its
emitter and receiver communications. Matching
this frequency eliminates an affect from alter-
nate light sources: e.g. overhead lighting, and
cosmic/glow lighting.
#400287.............................$348.50
Serving Two Lanes
Approach Mounted Transformer:
For centers with 115V Power Supply at Foul Line.
Replaces: Brunswick Gold Crown
and Astro/2000.
Masking Wall Mounted: For centers
with 115V Power supply at Pinsetters.
Purchase Separately: New Wire Run from
Transformer to Foul Unit.
Replaces: Brunswick Crown Imperial Telefoul.
Kit #400287 Includes: Detector Assembly, Transformer, two Reflector Assemblies and All
Mounting Hardware to install complete kit. Power Supply Cable #400302 (order separately).
Wizard Surface for Brunswick Surface Ball Returns
Example: 6-Lane Center with Aisleway
Low Voltage
Centers with no 115V power supply available
at the approach area should also order the
following wire harness. This kit allows trans-
former installation at mask unit.
Wire Harness
#400302 .........$47.67
Wizard Extreme Spare Parts:
Description Part Number
Spare Parts Kit .................................#400292
PC Board...........................................#431097
Sensor Block Assembly.....................#431099
Reflector Only ...................................#800057
Reflector Assembly (2) ......................#400169
Foul Signal LED, Including
Holder and Harness ..........................#440145
Scoring Harness (Bswk)....................#440155
Scoring Harness (AMF) ......................#440153
Buzzer Assembly...............................#400170
Transformer Assembly (115V60Hz)...#400281
Transformer Assembly (230V50Hz) ...#400293
Sensor harness (3-wire) ....................#440146
The Wizard Surface
unit will fit under either
of these covers.
Alignment
Indicator
Vibration
Protection
Reflector
Assembly
All Modular
Design
Scoring Harness
Power Harness
Note: Centers requiring foul
Indication at the foul line should add
Foul Signal LED Holder and Harness
#440145 ........$45.95