Specifications

8
Rake Shaft Assembly
46
Rake Shaft Assembly
Features and Benefits
Big Savings: ZOT’s Rake Tube Conversion
converts the original rake shaft assembly to
a 3-piece module; and at a fraction of the
cost of replacing the complete assembly.
Each side of the ZOT Conversion costs about
a third of the cost of a complete replace-
ment rake shaft assembly.
Stronger Design: ZOT’s Rake Tube
Conversion features added Steel reinforcing
at the common rake tube breakage points,
ensuring longer life.
Save Your Good Parts: Rake Crossover
Tubes are rarely damaged, so why replace
them just because the sides are broken?
With ZOT’s Conversion you only need to
replace the side that is damaged.
Save Time: It’s faster to replace two sides
with the ZOT Conversion, than to replace the
entire rake assembly – which is rarely
necessary.
Note: Only Available From ZOT.
#420068 (7-Pin Side).........$166.35
#420069 (10-Pin Side) ......$166.35
For Pinsetters with Serial Numbers
24,000 and Over, Order:
(Gray painted machines)
#420082 (7-Pin Side).........$166.35
#420083 (10-Pin Side) ......$166.35
For Pinsetters with Serial Numbers
24,000 and Under, Order:
(Green painted machines)
Note: ZOT Counter Balance Pivot Wheel Kit
#420062 is necessary for all pinsetters with
serial numbers
below 24,000 when replac-
ing the rake assembly.
Rake Lift Arm Lever Repair Kits
For ‘A2’, Jetback and Straight ‘A’ Pinsetters
“V” Lever Repair
#420071
.................$41.95
Rake Tube Conversion
For ‘A2’, Jetback and Straight ‘A’ Pinsetters
Cut Here
Added
metal far
beyond the
end of the
rake stop
“C” Lever Repair
#420090.................$37.95
Features and Benefits
Cover Elongated Rabbit Ear Holes: Prevents triggering failure, improper
rake drop and automatic scoring miscounts.
Shock Mount Pivot Repair
#420310
.................$47.95
#620155 - Add this product to prevent
wear to ʻVʼ lever pivot hole