Specifications

7
Elevator
Assembly
Call ZOT at 1-800-525-8116 for more details
Elevator Assembly
43
Universal Urethane Wheel Guard
For Straight ‘A’, Jetback and ‘A2’ Pinsetters
#420305.................$29.95
Keeps pins away from moving belts and elevator wheel; to prevent costly pin damage.
• Durable half-inch Urethane wheel guard that does not mark balls or pins.
• Designed to mount on either the right or left side of the elevator.
• Mounting holes are square to fit the head of carriage bolt mounting hardware.
• All mounting hardware is included.
Direct Replacement: For original A2
Rear Elevator Panel.
Also compatible with Jetback and
Straight ‘A’ machines.
Stop Welding: ZOT’s replacement
Rear Elevator Panel is a far better
alternative to repetitive patching
and welding – in fact many rear pan-
els are beyond welding and are no
longer fully functional.
Rear Elevator Panel
#420485
.................$84.50
Location Pin Conversion (Magnetic Clutch)
For Straight ‘A’, Jetback and ‘A2’ Pinsetters
#420079................$24.50
Eliminate Magnetic Clutch failure: a high percentage of
Magnetic Clutch replacement is the result of Location Pin
damage, or the Pin falling out. When the Location Pin is
damaged or missing the entire unit will rotate until it’s
stopped by the power core; which sometimes causes per-
manent damage where the power core is connected to the
Clutch Coil; or it can damage the Power Cord Strain Relief at
the outer case. ZOT’s Location Pin Conversion will prevent
this kind of damage.
Preventative Modification saves Maintenance Cost:
Modifying your pinsetters using ZOT’s Location Pin
Conversion in advance will save you the cost of a total
replacement of the unit. You can modify ten (10) machines
for less than the cost of replacing one (1) Magnetic Clutch
Assembly
Prevent major Breakdowns: Check the Pin and modify your
pinsetter before the Pin goes missing.
Easy to Install: no disassembly required to install the ZOT
Location Pin.
IMPROVED