Specifications

5
Electronic
Triggering
23
Call ZOT at 1-800-525-8116 for more details
Electronic Triggering
Features and Benefits
(continued)
Simple Installation: ZOT’s ET 2001 installs
in three easy steps:
1. Wall transformer plugs into 115 Volt out-
let for power supply.
2. Two conductor outputs for each Pinsetter
simply quick-splice to the bowlers reset but-
ton wires.
3. The Infrared Emitter and Receiver are sim-
ply plugged in, leveled and secured at each
lane.
Note: The ET 2001 has two adjustable time
del
ay outputs, e
ach of which serve two lanes.
Reduces Wear/Eliminates Scoring
Miscounts: The ET 2001 is secondary to the
triggering system on Brunswick machines,
which:
1. Reduces wear and tear on the take data
relay.
2. Eliminates scoring miscounts because
Brunswick’s scoring system is activated
from the cluster gears.
Rake/Sweep Path Sensor Mounting: The
Sensors can be mounted behind the
Rake/Sweep (in the Rake/Sweep path).
Note: The Kit for Brunswick Machines
includes
two Mercury
Switches, to facilitate
this feature.
Flip Top Cover: The Control Box Cover hinges
from the top, which means no screwdriver is
needed to view the PC Board. Simply flip
the cover up for inspection, and down again
when finished.
Rake Down Diagnostic Indicator:The ET
2001 for Brunswick machines, features an
‘Active Rake Down’ indicator.
ET 2000 & ET 2001 Spare Parts 115V &
230V:
Description Part Number
Spare Parts Kit #400072
PC Board #432052
Blue Emitter Block #400001
Flat Gray Emitter Cable #450005
Gray Receiver Block #400133
Transformer for 115V #290005
Transformer for 230V #290006
Sensor Shims #400121
Sensor Lens Kit #400032
ZOT Unit Replaces two Brunswick
#57-214904-000
ZOT Unit Replaces 79 Scanner
Ball Detect
Remote Trigger Ports
Note: To activate the Brunswick Scoring Feature this product requires a specific harness
(see below for details)
Optional Ball Detect for Brunswick Scoring
If you’re dissatisfied with your present AS80 and AS90 Series Ball Detect System, the ZOT ET
2001’s ability to double as an improvement to your automatic scoring system makes it the
most cost effective ball detect system available.
The following are the wire harness options necessary to activate the automatic scoring ball
detect feature: (The wire harness options below are only compatible to ZOT ET 2001).
#400159 Brunswick AS 79 Scanner ...................................$64.50
#440080 Brunswick AS 86 Scanner ...................................$52.80
#400194 Brunswick AS 90 Camera & FrameWorx .............$64.50
Note: Wire harness options are only
compatible to ZOT ET 2001