Installation guide

Aftermarket LCD Upgrade Manual
46 P/N 400-283-301 Rev A
8. Once you have satisfactorily setup the
screen for size and centering, go back to the
first menu and enter 9632. If you have
QubicaAMF scoring, you will need to make
sure the option at the bottom of this screen
(Set ID), is set to 1.
9. Once you have completed these
adjustments, go to 8.1.3 Common Adjustments.
8.1.2 VGA (RGB)
1. Make sure your monitor is in VGA mode (Press the
<SOURCE> button and select VGA).
2. Bring the scorer online and make sure your display shows at least 4 or 5 bowlers in
your normal grid configuration. Go to the Main Menu by pressing the <MENU>
button on the remote.
3. Scroll down to VGA then press the right
arrow button.
4. This will take you to the screen at right.
The first thing you should do is select Auto
Adjust. This should give you a good
starting point. If further adjustments are
required, use the H. Position, V. Position,
Phase and Clock adjustments.