Installation guide

Aftermarket LCD Upgrade Manual
P/N 400-283-301 Rev A 27
Figure 5 – 283-200-302 Frameworx Connections
Figure 4 – 283-200-301 AccuScore Plus Connections
Figure 3 – 283-200-303 Qubica VDB Connections
5 Component Identification
5.1 LCI S-Video Interface
Many of the Aftermarket LCD upgrade packages utilize an S-Video interface. If your package
includes this interface, refer to the pictures on this page and also Section 7 – Making the
Right Connections for hookup assistance.
5.1.1 Ferrite Filter Installation
One or two ferrite filter(s) (283-200-209) is/are
supplied on systems requiring the S-video interface (Qubica VDB 283-
200-303 and AccuScore Plus 283-200-301).
For the Qubica VDB system, 2 filters are provided for each of the RGB to
LCI cables (283-200-176). They must be used as shown in the picture at
right. Note that the cable is wrapped around the filter two times.
For the Accuscore Plus system, one filter is provided for use on
the S-Video interface power input cable. Note that the cable is
wrapped around the filter two times.
Please note that no filter is required on the power input cable
for the Qubica VDB S-video interface (283-200-303).