Certifications 2

Page 7/14
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 16.03.2021 Revision: 09.03.2021Version number 8
Trade name: BRUNOX® epoxy® - BULK
(Contd. of page 6)
52.1.3
CAS: 67-64-1 acetone
WEL (Great Britain) Short-term value: 3620 mg/m³, 1500 ppm
Long-term value: 1210 mg/m³, 500 ppm
WES (Australia) Short-term value: 2375 mg/m³, 1000 ppm
Long-term value: 1185 mg/m³, 500 ppm
WES (New Zealand) Short-term value: 2375 mg/m³, 1000 ppm
Long-term value: 1185 mg/m³, 500 ppm
bio
CAS: 112-34-5 2-(2-butoxyethoxy)ethanol
WEL (Great Britain) Short-term value: 101.2 mg/m³, 15 ppm
Long-term value: 67.5 mg/m³, 10 ppm
CAS: 64-18-6 formic acid
WEL (Great Britain) Long-term value: 9.6 mg/m³, 5 ppm
WES (Australia) Short-term value: 19 mg/m³, 10 ppm
Long-term value: 9.4 mg/m³, 5 ppm
WES (New Zealand) Short-term value: 19 mg/m³, 10 ppm
Long-term value: 9.4 mg/m³, 5 ppm
·
Additional information:
The lists valid during the making were used as basis.
·
8.2 Exposure controls
·
Personal protective equipment:
·
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
·
Respiratory protection:
Short term filter device:
Filter A/P2
Filter AX
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer
exposure use self-contained respiratory protective device.
·
Protection of hands:
Check the permeability prior to each anewed use of the glove.
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
(Contd. on page 8)
GB