Installation manual

SRE-2000C 11-14-2007

• This is correct lift operation, a safety switch in the

seat swivel prevents the unit from operating with

the seat out of the correct operating position.

• Check batteries in remote call / send unit.

• Transmitters must be `learned’ to receiver.

• Connections were not made correctly when chang-

ing unit from left-side to right-side operation.

Consult installation manual for diagram of correct

wiring conguration.

• Check limit switch in carriage assembly for proper

operation.

Wipe down rail.

UNIT WILL NOT

OPERATE UNLESS THE

SEAT IS POSITIONED

SO THAT IT FACES

THE OPEN SIDE OF

THE STAIRS

UNIT DOES NOT

SHUT OFF WHEN IT

HITS THE BUMPER

AT THE END OF THE

RAIL

UNIT WILL NOT

OPERATE WITH

CALL / SEND

REMOTE

ROUGH OR

CHATTERING RIDE

TROUBLESHOOTING