Installation manual

©2007,2001 BRUNO INDEPENDENT LIVING AIDS, INC.®
SRE-2000C 11-14-2007
44
If the overspeed switch trips, reset two levers: (1) the overspeed lever,
and (2) the cam lever.
See the photos below for set and tripped lever positions.
To reset the levers, rst rotate overspeed switch lever. While rotating this lever,
push in on the wires to engage the overspeed switch. (If the lever is rotated
too far, the switch will not be reset.)
Rotate the cam lever just until you feel the switch engage.
OVERSPEED
overspeed switch
overspeed
lever
cam lever
(shown in set
position)
levers to reset if overspeed switch trips top view
cam lever
(shown in tripped
position)
cam lever
(shown in set position)
OVERSPEED