Installation manual

39
SRE-2000C 11-14-2007
©2007,2001 BRUNO INDEPENDENT LIVING AIDS, INC.®
12. Insert the shorter bolts ON THE LEFT,
and the longer (M14) bolts ON THE
RIGHT.
The bolts should now be on the side
opposite the starting location.
13. Only tighten the short bolts to
secure the front cover. The long bolts are
used to fasten the footrest.
14. On the footrest, while applying downward
pressure on the handle, remove the
Phillips-head screw attaching the adjusting
rod to the handle.
15. Remove the spring from the handle.
16. Remove the (2) M10 bolts securing the
bracket to the footrest plate.
17. Swing the handle around so it is on the
up side of the staircase.
18. Attach the handle bracket to the footrest
plate with the (2) M10 bolts.
19. Reattach the spring.
20. Apply downward pressure to the handle
while attaching the adjusting rod to the
handle with the Phillips-head screw.
21. Verify clearances, especially the footrest-
to-stepnose clearance.
CONVERSION TO RIGHT-HAND INSTALLATION
right-hand installation
shorter bolts
on left
longer bolts on
right
footrest-to-stepnose
clearance
M10 bolt
M10 bolt
spring
Philips head
screw
rod