Installation manual

25
SRE-2000C 11-14-2007
©2007,2001 BRUNO INDEPENDENT LIVING AIDS, INC.®
5. Mount the seat mount cover using the
pre-attached Velcro® strips.
6. Mount the side cover to cover the
unused opening, using the pre-attached
Velcro® strips (cover the hole on the
right for left-side installations, and the
hole on the left for right-side installa-
tions).
7. Position the front cover as shown and
secure with the black bumpers and #8 x
.75” lg Phillips head sheet metal screws.
8. Run the carriage up and down the
rail to verify all clearances.
9. Finish mounting and securing all rail
clamps.
INSTALLATION
mount seat mount cover
mount side cover
position and secure front cover
Illustrations on this page pertain
to a RIGHT-SIDE installation.
verify clearance