Installation manual

19
SRE-2000C 11-14-2007
©2007,2001 BRUNO INDEPENDENT LIVING AIDS, INC.®
Bruno ships this stairway elevator with
fasteners appropriate for WOODEN
STAIR TREADS ONLY.
Installation of the Stairway Elevator on
surfaces made of materials other than
wood may require different fasteners
specic to the material.
If you are unsure as to which fastener
applies to the installation, please contact
the Bruno Technical Service Department.
IMPORTANT MEASUREMENT:
Take before and after securing each clamp!
back of rail
to closest obstruction
Examples of obstructions:
• wall
• railing
• lip of bannister
• windowsill
• handrail)
15. For installation on hardwood stairs,
Bruno recommends drilling a pilot hole
for the clamp fastener before inserting
the fastener.
16. Do not secure the remaining clamps
until the carriage is on the rail, and
all clearances are veried.
INSTALLATION
2-5/8” (67 mm) from
closest obstruction
distance must
measure 2-5/8”
(67 mm)